Gambrel Barns

Shingles installed with nails have a much better holding power and a greater wind resistance. Shingles on all Pine Creek Structures heavy duty storage sheds are installed with nails.

Shingles that are extended past the roof edges allow for shrinkage and preserve your building for decades of use.

Beautiful woodgrain vinyl coating; has better fade resistance; is thicker and more rigid, making it buckle-resistant and impact-resistant.

Double-bent trim edges have twice the strength, keeping trim more rigid, protecting it from buckling, and providing stronger wind resistance.

Fiberglass doors are the most durable doors on the market and have a high impact resistance. If ever scratched, they can easily be touched up. It has a beautiful raised panel woodgrain appearance. The doors will never rust, and all edges are sealed with no wood exposed to the elements. The interior core of the door is insulated with spray foam insulation. Stainless steel hinges will never rust. The screws are concealed, making the door burglar-resistant. No screw holes in the face of the door.

2×4’s set on edge will keep your doors rigid, discouraging the top of your doors from bowing out and being open to the elements, and also keeping the bottom of doors tight to discourage entry of unwelcome critters. A piano hinge has continuous support along the entire door. It is fully aluminum and will never rust. Unlike T-hinges, the fasteners are covered by trim, making it burglar-resistant.

You get the peace of mind that your shed has one of the best vinyl sidings on the market. This 100% PVC product is guaranteed not to fade as it ages. It has one of the better wind load and impact resistance ratings on the market.

LP SmartSide is designed to withstand many years of exposure to the environment. With a manufacturer’s warranty like this you can’t go wrong! This is an engineered product with zinc borate treatment (a long-acting treatment against moisture, mold and termites). The interior of this siding has a coating which gives your interior a consistent appearance. Factory pre-primed panels add another layer of protection against Mother Nature and improves the quality of paint finish on your building. Nobody likes to paint! Our coatings will last years longer than most of the latex paints on the market today. You have the peace of mind of knowing that your building will keep its original beauty for many years.

Nails offer more holding power and ensure that your structure will stay as secure as the day it was built.

Pressure-treated floor joists add many years of rot-free and termite-resistant protection to your floor. Your building will only last as long as the foundation it is built on.

5/8” engineered sheeting gives you added support needed for riding mowers, ATV’s and other heavy storage. This is a solid compressed product, unlike plywood, which may have voids in the plys, causing weak spots or delamination in the floor. 

Ensures you extra strength and stability at the corners of your structure.

Strengthens the walls at a crucial structural point. Keeps your walls from bowing out and ensures that your roof will not sag or bow.

The wall plate corners fit together snug like a puzzle, then are nailed thru the top plate into the bottom plate. This ensures you a rock-solid corner joint that will not separate.

All wood used is guaranteed to be structurally sound. The inside of your building will have a clean appearance. You will see very little, if any imperfections on the lumber. We guarantee termite-free and mold-free wood. 2×4’s are spaced on 16” centers for a solid structure.

Standard roof sheathing is 7/16” OSB or 1/2” CDX plywood. (Standard product will vary by sales location). You have a choice of which product you want installed on your roof.

Choose from several colors of TAMKO TitanXT premium architectural shingles. Drip edge is used on all roof edges. (We recommend adding a ridge vent to eliminate fumes and intense heat buildup in the roof of your structure). We also offer metal roofing.

For T-111 buildings: Our standard wall sheathing/siding for T-111 style buildings is LP Smart Side® which carries a 50-year mfg warranty against splitting, cracking, or delamination. We recommend this product for durability. Available in 22 colors.

For vinyl, cedar, or log-sided buildings: Our standard wall sheathings (underneath these siding applications) are 7/16” OSB or 1/2” CDX plywood. (Standard product will vary by sales location. You have a choice of which product you want installed underneath your siding.)

Standard vinyl siding (4 1/2” Dutch lap) carries a lifetime manufacturer’s warranty. Available in 8 standard colors and many additional optional colors. You also have the option of exactly matching your house siding.

Board ‘N’ Batten, Log, and Cedar siding comes with 5 stain choices. Normal aging/weathering of natural wood products will occur, resulting in visible cracks in the siding over time. (This is not covered under our Top-To-Bottom warranty.)

LP Smart Side® and vinyl-sided buildings are standard with aluminum single-hung windows with screens. (Shutters are standard with all aluminum windows). Standard window size choices are 18” x 23” or 18” x 36”. Board ‘N’ Batten, log-sided and cedar-sided buildings are standard with rustic handmade wood square-top windows. (Wood windows do not include shutters). Window size choices are 25” x 28” or 24” x 36” single-hung. (Doors and windows can be placed wherever you prefer at no additional cost.)

All wood-sided buildings (LP Smart Side, Board ‘N’ Batten, Cedar, or Log) include doors with matching siding. All vinyl-sided buildings are standard with a fiberglass raised-panel door. (Doors and windows can be placed wherever you prefer at no additional cost.)

Heavy Duty Structure Standard Door Sizes:

6′ Wide Buildings: 36” Single Entry Door
(6′ Wide HD vinyl mini barns include a 30″ fiberglass door instead)

8′ Wide Buildings: 48” Double Door

10′ Wide Buildings: 60” Double Door

12′ & 14′ Wide Buildings: 72” Double Door